PROPELLERS

Buy & sell drones and equipment globally

or
Don't have an account?

DJI Matrice 600 Pro

Release Date

November 2016

Retail New Price

$4,999

Type

Enterprise Drones

Subtype

cinematic
DJI’s Matrice 600 Pro (M600 Pro) is a heavy‑lift, professional hexacopter built for cinema and industrial missions. It upgrades the original M600 with the A3 Pro flight controller (triple‑redundant IMUs/GNSS with D‑RTK compatibility), a dust‑resistant E2000 Pro propulsion system with active‑cooled motors, an updated multi‑battery charging hub, and a more compact, faster‑to‑deploy airframe with pre‑installed arms and antennas. It natively supports DJI’s Zenmuse cameras, the Ronin‑MX gimbal, and DJI Focus, and carries up to a 6 kg payload for demanding aerial imaging workflows.
(dji.com)

Selling Points

  • Heavy‑lift platform with up to 6 kg payload for cinema cameras (e.g., RED) and industrial sensors.
  • A3 Pro flight controller with triple‑redundant IMUs/GNSS and D‑RTK support for centimeter‑level positioning and higher reliability.
  • Pre‑installed arms/antennas and a foldable design accelerate setup and reduce transport volume.
  • Updated parallel charging hub charges six flight batteries (and two RCs) to speed turnarounds.
  • Lightbridge 2 HD link with HDMI/SDI outputs and broadcast‑friendly formats for live production.
  • Wide compatibility with Zenmuse gimbals/cameras and Ronin‑MX for flexible payload integration.
  • Long hover endurance without payload (up to 38 minutes with TB48S).

Advantages supported by DJI’s Newsroom announcement and Support specs.
(dji.com)

Drawbacks

  • Requires six matched Intelligent Flight Batteries to take off and operate, adding cost/weight and logistics.
  • Large airframe and higher system weight can complicate transport and field deployment.
  • No built‑in obstacle avoidance sensors are listed in official specs; mission planning and pilot skill are critical.
  • Lightbridge 2 transmission tops out at about 5 km (FCC) and uses older broadcast standards compared with newer DJI links.

Constraints corroborated by DJI Support specs and M600 series FAQs.
(dji.com)

Technical Specs

  • Flight Controller: DJI A3 Pro (triple redundancy; D‑RTK compatible)
  • Transmission: Lightbridge 2 HD; FCC range up to 3.1 mi (5 km)
  • Max Payload: Up to 6.0 kg (cinema/industrial payloads)
  • Recommended Max Takeoff Weight: 15.5 kg
  • Hovering Time (6× TB47S): No payload: 32 min; with 6 kg payload: 16 min
  • Hovering Time (6× TB48S): No payload: 38 min; with 5.5 kg payload: 18 min
  • Batteries: Six Intelligent Flight Batteries (TB47S/TB48S); updated hub charges 6 batteries (and 2 RCs) in parallel; full charge approx. 92 min (TB47S) / 110 min (TB48S)
  • Propulsion: DJI 6010 motors; 2170R folding props; E2000 Pro dust‑resistant, actively cooled system
  • Dimensions (Unfolded): 1668 × 1518 × 727 mm (including landing gear)
  • Dimensions (Folded): 437 × 402 × 553 mm (excluding landing gear)
  • Diagonal Wheelbase: 1133 mm
  • Weight: 9.5 kg (with 6× TB47S); 10.0 kg (with 6× TB48S)
  • Max Speed: 40 mph / 65 kph (no wind)
  • Ascent / Descent: 5 m/s / 3 m/s
  • Max Service Ceiling (ASL): 2500 m with 2170R props; 4500 m with 2195 high‑altitude props
  • Operating Temperature: −10 °C to 40 °C (14 °F to 104 °F)
  • Gimbal/Camera Compatibility: Ronin‑MX; Zenmuse Z30, X5/X5R, X3, XT; Zenmuse Z15 series
  • Broadcast Outputs (LB2): Supports broadcast‑standard signals (e.g., 720p59.94, 1080i50) via HDMI/SDI
  • Original Launch Price (USD): $4,999
  • Release: November 2016

Key specs sourced from DJI’s official Support page; launch features and payload from DJI’s Newsroom announcement; charger details from DJI’s CN press release; launch price reported at introduction by Digital Trends.
(dji.com)

Active Listings

0 listings for DJI Matrice 600 Pro

Loading listings...